Theme park rides standard safety norms

The latest safety Modern mini flying chair implemented rides " rides safety norms ."
Cancellation many lag terms , but also added a lot of requirements. The main changes reflected in the five areas .
First, slide type, such as " roller coaster" increased acceleration allowed. This is because when the "roller coaster" dropped from the highest point to the lowest point , very fast, great acceleration , in order to take the people do not get hurt, acceleration should be limited within a certain range.
Second, to increase the variety of loads, such as wind load , because when the wind at six or more , coupled with their speed impact, by people may have been Modern mini disco , it is very dangerous and must be stopped rides operation .
Third, the safety factor has been adjusted , decreased. Have been able to reach a common material safety requirements , there is no need to use special materials. The safety factor previously set too high, resulting in an increase in material waste and cost.
Fourth , increasing the safety assessment and safety analysis of new requirements.
Fifth, increase the water rides safety standards.

Weld important park rides

Refers to the various types of weld force main structure, the main force components Children Train axis ( pin ) , and the safety device on the key components , withstand greater stresses. Such as: welding the weld axis , cantilever root weld , butt weld seam track , track and stand between the force structure or movable movable parts ( components ) welds, equipment support or bearing welds, boom or pillar connection with the device body weld , the weld passenger device frame , seat support weld seam hanging pieces (including the hanging pieces welds between beams or Tagada Disco Rides ) , the force axis welds, shafting connection between the weld seam or gear train and support , oil ( gas ) cylinders bearing welds , safety accessories ( parts ) welds, welding turntable nodes , weight weld , cockpit ( weight ) and a large arms , lifting mechanism ( including pulley ) connected to the frame welds, weld joint tower , spindle and turntable fixed weld , the weld wire rope anchor nodes and other safety devices ( such as safety pressure bar and brake ) and the body weld other structures or components connected to the weld , the weld design units and other important documents or design accreditation bodies identified .

Park rides key components

That involve safety, need to do the type mini flying chair components, such as seat belts, safety bar, U-shaped bar and other passenger restraints and locking positioning device, cockpit and constrained by people hanging point objects, parts and components used in lifting points such as pins, U-shaped cards, O-rings, wire rope, steel Si Shengsheng clips, wire rope fittings, chain, chain joint, elastic bungee cords; bungee jumping, trapeze, gliding umbrella using bundled flexible restraints (or clothing); design documents and other key Park Airplane ride units or design documents to determine the identification of bodies.
Safety devices (or safety accessories, safety components)
     Include: belts, safety pressure bar, cabin locking devices, brakes, anti-kickback device, motion limiting device, speed limiting device, buffer device.
The main material
     Refers to the structure of the main force, the main force components, it is important axis (pin), key components, safety devices and other metal and nonmetal materials.

Park rides major force structure

Refers to the large-scale amusement equipment facilities bear the main load of steel components (or bearing structural parts made ​​of other materials), such as pillars, beams, rails, an important support (bracing) structural system composed of passenger unit frame, the force can moving structure, infrastructure, significant hanging structure.
The main force components
     Refers to withstand greater stresses in the structure and mechanical systems components or smaller components, such as shafts and shafting important, wheel and gear train, an important safety device and its components, transmission and improve the mechanical systems of the key Mini Tagada, devices, etc. .
Important axis (pin) (or primary pin)
     Means passengers will result in personal injury where the axis of the pin class components, such as the spindle, the central shaft, seat hanging shafts, axle, oil (gas) cylinder upper and lower support pin, pin, etc. under the seat support arm failures.

Park rides Professional Glossary

Major design changes and Airplane-ride design changes
Refers to the design parameters of the unit change in product licensing, safety technology parameters, structure type parameter changes and other important design parameters descriptive parameters, add some design input, or the occurrence of design changes (such as the curvature becomes smaller, the transmission system or control system, the main driver changes in the way the tall spindle welding equipment welding or seam rearranged, etc.), resulting in large-scale amusement rides facilities, safety performance, force conditions change, or deterioration of operating conditions.
Changes other than the above changes are general changes. If the product is only the cockpit to reduce the number (in the same level range), such as shaking his head swivel seat only partially canceled, Corsair remove only a few seats, etc., do not think the design changes.